LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 965 (Fuel Charging And Controls - 5.0L 32V Ti-VCT (359KW/486PS) (WU)/5.0L Ti-VCT V8 (343KW/466PS) (MF)) >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Installation

Fuel Pump Driver Module (FPDM): Installation

WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel pump driver module, then install and tighten the fuel pump driver module retainers.

    Torque: 44 lb.in (5 Nm)

    GFD602018Courtesy of FORD MOTOR COMPANY
  2. Connect the fuel pump driver module electrical connector.
    GFD602017Courtesy of FORD MOTOR COMPANY
  3. Install the rear seat cushion. Refer to: Rear Seat Cushion