Block Heater: Removal

WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Drain the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
NOTE: Make sure the block heater wiring is routed and secured away from rotating or hot components.

Disconnect the block heater electrical connector.

Courtesy of FORD MOTOR COMPANY
Remove the block heater.
Torque

: 30 lb.ft (40 Nm)

Courtesy of FORD MOTOR COMPANY