LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 945 (Fuel System - General Information - 5.0L 32V Ti-VCT (359KW/486PS) (WU)/5.0L Ti-VCT V8 (343KW/466PS) (MF)) >> General Procedures >> Fuel Tank Draining

Fuel Tank Draining

WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to: OEM COLOR CODING

Special Tool(s) / General Equipment 

Fuel Pump and Sender Unit Locking Ring Wrench
Fluid Container

Draining 

  1. Refer to: Fuel System Pressure Release 
  2. Refer to: Battery Disconnect and Connect
  3. Use the General Equipment: Fluid Container
    GFD604126Courtesy of FORD MOTOR COMPANY
  4. GFD604127Courtesy of FORD MOTOR COMPANY
  5. Refer to: Quick Release Coupling 
    GFD604128Courtesy of FORD MOTOR COMPANY
  6. NOTE: Make sure that a new O-ring is installed.
    NOTE: Make sure that the installation marks are aligned.

    Use the General Equipment: Fuel Pump and Sender Unit Locking Ring Wrench

    GFD604129Courtesy of FORD MOTOR COMPANY
  7. GFD604130Courtesy of FORD MOTOR COMPANY
  8. GFD604131Courtesy of FORD MOTOR COMPANY
  9. NOTE: Make sure that the component is clean, free of foreign material and lubricant.

    Refer to: Quick Release Coupling 

    GFD604132Courtesy of FORD MOTOR COMPANY
  10. NOTE: Make sure that a new O-ring is installed.
    NOTE: Make sure that the installation marks are aligned.

    Use the General Equipment: Fuel Pump and Sender Unit Locking Ring Wrench

    GFD604133Courtesy of FORD MOTOR COMPANY
  11. GFD604134Courtesy of FORD MOTOR COMPANY