LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 944 (Engine - 5.0L 32V Ti-VCT (359KW/486PS) (WU)/5.0L Ti-VCT V8 (343KW/466PS) (MF)) >> Removal And Installation >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Lubricate the hydraulic lash adjuster with clean engine oil prior to installation.

    Install the hydraulic lash adjuster.

    GFD600524Courtesy of FORD MOTOR COMPANY
  2. Install the rocker arm. Refer to: Rocker Arm 
  3. Road test the vehicle.
scientia non olet · About LEMON Manuals