Removal And Installation: Flywheel: Installation
WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Install the flywheel and the bolts. Install Special Service Tool: 303-103 (T74P-6375-A) Holding Tool, Flywheel.
Torque: Stage 1: 28 lb.ft (38 Nm) Stage 2: 90 deg.
- Install the clutch disc. Refer to: Clutch Disc and Pressure Plate - 5.0L 32V Ti-VCT
- Use the Powertrain Control Module (PCM) Misfire Monitor Profile Correction routine in the diagnostic scan tool.
- Road test the vehicle.