Crankshaft Pulley: Removal
WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the following items:
- Refer to: Cooling Fan Motor and Shroud
- Refer to: Accessory Drive Belt
- Refer to: Air Conditioning (A/C) Compressor Belt
-
NOTE: If necessary, retain the original bolt for to perform the crankshaft front seal procedure.
Remove and discard the crankshaft damper pulley bolt. The washer will be reused.
-
NOTE: Use a universal puller (such as an OTC 6667, or equivalent).
Using a universal puller, remove the crankshaft damper pulley. Use the General Equipment: Puller