Muffler Inlet Pipe: Removal

WARNING: This page is about a different car, the 2021 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview
Loosen the clamps and separate the muffler and tailpipe from the RH catalytic converter and LH muffler inlet pipe.
Torque

: 35 lb.ft (48 Nm)

Courtesy of FORD MOTOR COMPANY
Loosen the ball clamp, release the bracket tab and remove the muffler inlet pipe.
Torque

: 41 lb.ft (55 Nm)

Courtesy of FORD MOTOR COMPANY