LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center And Warning Chimes (2 Of 2) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test CB: Invalid Data Received

Pinpoint Test CB: Invalid Data Received

  1. DTC Fault Trigger Conditions 
    DTC Description Fault Trigger Condition
    IPC U0401:00 Invalid Data Received from ECM/PCM A: No Sub Type Information Invalid speedometer and temperature gauge data received for 5 seconds or longer.
    IPC U0401:81 Invalid Data Received from ECM/PCM A: Invalid Serial Data Received Invalid speedometer and temperature gauge data received for 5 seconds or longer.
    IPC U0401:82 Invalid Data Received from ECM/PCM A: Alive/Sequence Counter Incorrect/Not Updated Invalid or missing cruise control/ACC data and charging system data received for 5 seconds or longer.
    IPC U0401:86 Invalid Data Received from ECM/PCM A: Signal Invalid Invalid odometer data received for 5 seconds or longer.
    IPC U0415:00 Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information Invalid or missing auto hold data received for 5 seconds or longer.
    IPC U0415:82 Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": Alive/Sequence Counter Incorrect/Not Updated Invalid or missing AdvanceTrac data received for 5 seconds or longer.
    IPC U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information Invalid or missing TPMS data received for 5 seconds or longer. (The TPMS indicator flashes for 75 seconds the on solid.)
    IPC U0422:82 Invalid Data Received From Body Control Module: Alive/Sequence Counter Incorrect/Not Updated Invalid or missing charging system data received for 5 seconds or longer.
    IPC U0424:00 Invalid Data Received From HVAC Control Module: No Sub Type Information Invalid or missing outside air temperature data received for 5 seconds or longer. (The outside air temperature displays as dashes, frost indicator illuminates.)
    IPC U0424:81 Invalid Data Received From HVAC Control Module: Invalid Serial Data Received Invalid or missing outside air temperature data received for 5 seconds or longer. (The outside air temperature displays as dashes, frost indicator illuminates.)
    IPC U0424:82 Invalid Data Received From HVAC Control Module: Alive/Sequence Counter Incorrect/Not Updated Invalid or missing outside air temperature data received for 5 seconds or longer. (The outside air temperature displays as dashes, frost indicator illuminates.)
    IPC U0431:82 Invalid Data Received From Body Control Module "A": Alive/Sequence Counter Incorrect/Not Updated Invalid or missing charging system data received for 5 seconds or longer.
    IPC U0452:81 Invalid Data Received From Restraints Control Module: Invalid Serial Data Received Invalid or missing Belt-Minder data received for 5 seconds or longer.
    IPC U0533:00 Invalid Data Received From Side Obstacle Detection Control Module "A": No Sub Type Information Invalid or missing BLIS or CTA data received for 1.6 seconds or longer.
    IPC U0534:00 Invalid Data Received From Side Obstacle Detection Control Module "B": No Sub Type Information Invalid or missing BLIS or CTA data received for 1.6 seconds or longer.

    Possible Sources 

    • Suspect module

  2. CB1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE MODULE SENDING INVALID DATA

    • Ignition ON.

    • Using a diagnostic scan tool, perform the self-test for the module in question sending the invalid data.

    Are any Diagnostic Trouble Codes (DTCs) present from the module sending the invalid data? 

    Yes  DIAGNOSE the module sending the invalid data. Refer to the appropriate Service Information article.
    No  DIAGNOSE the observable symptom present. Refer to the appropriate Symptom Chart(s) 
scientia non olet · About LEMON Manuals