LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Aid - Vehicles With: 180 Degree Camera Parking Aid Camera >> Diagnosis And Testing >> Parking Aid >> Pinpoint Test(s) >> Pinpoint Test X: U3000:42

Pinpoint Test X: U3000:42

  1. Normal Operation and Fault Conditions 

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    IPMB U3000:42 Control Module: General Memory Failure Sets in the IPMB when module RAM hardware fails.

    Possible Sources 

    • IPMB

  2. X1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPMB (IMAGE PROCESSING MODULE B) SELF-TEST

    • Ignition ON.

    • Using the diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).

    • Wait 10 seconds.

    • Using the diagnostic scan tool, carry out the IPMB self-test.

    Is DTC U3000:42 retrieved? 

    Yes  INSTALL a new IPMB, Refer to Image Processing Module B (IPMB)  .
    No  The system is operating correctly at this time.
scientia non olet · About LEMON Manuals