Pinpoint Test G: B115E:55
- DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the BCM when the rear parking aid camera is not configured. Possible Sources
- Camera configuration
- G1 CARRY OUT THE PARKING AID CAMERA CONFIGURATION
- Ignition ON.
- Using a scan tool, carry out the rear parking aid camera configuration.
- Using the diagnostic scan tool, carry out the BCM self-test.
Is B115E:55 retrieved?
Yes INSTALL a new parking aid camera. No The system is working correctly at this time.