LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco First Edition, 2D Utility >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center And Warning Chimes (2 Of 2) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test Ch: U300A:64

Pinpoint Test Ch: U300A:64

  1. DTC Fault Trigger Conditions 
    DTC Description Fault Trigger Condition
    IPC U300A:64 Ignition Switch: Signal Plausibility Failure Sets in continuous memory when the IPC detects a messaged start input for 15 seconds or longer. Once the fault condition is detected, the IPC operates with limited functionality for 15 seconds then returns to full functionality.

    Possible Sources 

    • Ignition concern
    • Starting system concern
    • IPC

  2. CH1 RETRIEVE IPC (INSTRUMENT PANEL CLUSTER) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).

    • Wait 10 seconds.

    • Using a diagnostic scan tool, perform the IPC self-test.

    Is U300A:64 recorded? 

    Yes  DIAGNOSE ignition concerns. REFER to: Steering Wheel and Column Electrical Components . DIAGNOSE starting system concerns.. For 2.3L, REFER to: Starting System . . For 2.7L, REFER to: Starting System .
    No  The system is operating correctly at this time.
scientia non olet · About LEMON Manuals