Traction Control System

The IPC provides a traction control system message in the message center to indicate that the traction control is disabled. When certain conditions exist such as wheel speed sensor failure, control valve failures, communication failures or low battery voltage in the ABS, the ABS module sends the stability/traction control indicator request message to the GWM over the HS-CAN2. The GWM sends the stability/traction control indicator request message to the IPC over the HS-CAN3 to illuminate the ABS warning indicator, brake warning indicator, stability/traction control indicator (sliding car icon), stability/traction control disabled indicator (sliding car OFF icon) and turns on the traction control off message in the message center.