LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 528 (Fuel Tank And Fuel Lines - 2.0L DURATEC - Hybrid (103KW/140PS) (UA)) >> Removal And Installation >> Fuel Level Sender >> Removal

Fuel Level Sender: Removal

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in GENERAL INFORMATION (HYBRID/ENERGI) . Failure to follow this instruction may result in serious personal injury.
  1. Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions .
  2. Refer to: Fuel Pump and Sender Unit .
    • Disconnect the electrical connector.

    • Release the retainer tabs and remove the Fuel Level Sender.

GFD436255Courtesy of FORD MOTOR COMPANY