LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Charging System (Battery, Battery Mounting And Battery Cables) (Hybrid/ENERGI)) >> General Procedures >> Battery Disconnect and Connect

Battery Disconnect and Connect

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Disconnect 

  1. WARNING: Before beginning any service procedure in this information, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

    GFD436462Courtesy of FORD MOTOR COMPANY
    GFD436463Courtesy of FORD MOTOR COMPANY
  2. NOTE: When disconnecting the battery cable to interrupt power to the vehicle electrical system, disconnect the battery ground cable only. It is not necessary to disconnect the positive battery cable.

    1. Torque

      : 44 lb.in (5 Nm)

    2. Torque

      : 80 lb.in (9 Nm)

GFD436464Courtesy of FORD MOTOR COMPANY

Connect 

  1. To install, reverse the removal procedure.