LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Rear Seats (Except Hybrid) >> Removal And Installation >> Rear Seat Cushion >> Removal

Rear Seat Cushion: Removal

  1. Remove the rear seat cushion.

    1. Release the locking tabs.
    2. Position the rear seat cushion upward.
    3. If equipped with heated seats. Disconnect the electrical connector.

GFD485105Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals