LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Rear Seats (Except Hybrid) >> Removal And Installation >> Rear Seat Armrest >> Removal

Rear Seat Armrest: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the rear seat cushion. Refer to: Rear Seat Cushion .
    1. Lift the rear seat latch release handle.
    2. Lower the rear seat backrest.
    GFD485093Courtesy of FORD MOTOR COMPANY
  2. If equipped with heated seats. Disconnect the heated seat electrical connector.
    GFD485094Courtesy of FORD MOTOR COMPANY
    1. Lower the backrest.
    2. Rotate the backrest hinge locking arm rearward and release the backrest.
    3. Remove the seat backrest.
    GFD485095Courtesy of FORD MOTOR COMPANY
  3. Unzip the backrest cover, release the backrest cover J-clips and remove the bolts.

    Torque

    : 89 lb.in (10 Nm)

    GFD485096Courtesy of FORD MOTOR COMPANY
  4. Remove the rear seat armrest.
GFD485097Courtesy of FORD MOTOR COMPANY