LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Perimeter Anti-Theft Alarm (Except Hybrid) >> Diagnosis And Testing >> Perimeter Anti-Theft Alarm >> Symptom Chart >> Symptom Chart: Anti-Theft - Perimeter

Symptom Chart: Anti-Theft - Perimeter

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Symptom Chart 

Condition Possible Sources Actions
The alarm system does not activate from an unauthorized entry at the hood Refer to the Pinpoint Test GO to Pinpoint Test A 
The alarm system does not activate from an unauthorized entry at a door Door ajar input DIAGNOSE the courtesy lamps not illuminating when a door is open. REFER to: Interior Lighting - Overview .
The alarm system does not activate from an unauthorized entry at the luggage compartment lid Luggage compartment lid input DIAGNOSE the incorrect luggage compartment lid ajar indication. REFER to: Instrumentation, Message Center and Warning Chimes .
The alarm system does not arm or no turn signals flash confirmation Refer to the Pinpoint Test GO to Pinpoint Test B 
No horn output during alarm activation Horn output concern REFER to: Horn .
False alarm activation Door ajar input
Hood switch input
Luggage compartment lid ajar input
Panic button pressed on a RKE transmitter
A valid PATS key read was NOT received when the ignition transitioned to RUN
An intermittent fault exists. MONITOR the BCM alarm event Parameter Identifications (PIDs) to identify and isolate the cause of the last alarm activation.
Most Recent Alarm Trigger Event (ALARM_1)
2nd Most Recent Alarm Trigger Event (ALARM_2)
3rd Most Recent Alarm Trigger Event (ALARM_3)
4th Most Recent Alarm Trigger Event (ALARM_4)