Windshield Washer Reservoir: Removal

NOTE: Removal steps in this procedure may contain installation details.

Remove the cap.

Courtesy of FORD MOTOR COMPANY
Remove the RH side Fender Splash Shield. Refer to: Fender Splash Shield .
Remove the bolts, the retainers and the front underbody shield.

Courtesy of FORD MOTOR COMPANY
Remove the retainers and position aside the front bumper cover.

Courtesy of FORD MOTOR COMPANY
NOTE: Be prepared to collect escaping fluid.

NOTE: Front bumper cover removed for clarity.

Remove the windshield washer reservoir.
1. If equipped. Disconnect the electrical connector.
2. Disconnect the electrical connector.
3. Remove the retainers.
4. Remove the bolts.
  Torque: 44 lb.in (5 Nm)
5. Remove the windshield washer reservoir.

Courtesy of FORD MOTOR COMPANY