Pinpoint Test P : U0140:00: Notes
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The PAM communicates with the BCM through the HS-CAN1.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | A continuous and on-demand DTC that sets when the PAM is unable to communicate with the BCM for 5 seconds or more. |
Possible Sources
- Communication concern
- BCM
- PAM (integral to the BCM) concern