Pinpoint Test M : U0101:00: Notes
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The PAM communicates with the TCM on the HS-CAN1.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0101:00 | Lost Communication with TCM: No Sub Type Information | Sets in continuous memory in the PAM if messages received from the TCM are missing for 5 seconds or more. |
Possible Sources
- Communication concern
- TCM (integral to the PCM)
- PAM (integral to the BCM) concern