Network Message Chart
BCM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Camera commands (vehicles with 203 mm (8 in) touchscreen) | APIM | Used to command the static and active guidelines status and zoom. |
| Camera commands (vehicles without 203 mm (8 in) touchscreen) | FCDIM | Used to command the static and active guidelines status and zoom. |
| Parking aid range to object | PAM | Used to highlight the zone where an object is detected. |
| Selector lever (PRNDL) status (HEV and PHEV only) | TCM | Used to enable and disable the rear video display on hybrid vehicles. |
| Selector lever (PRNDL) status (except HEV and PHEV) | PCM | Used to enable and disable the rear video display. |
| Steering angle status | PSCM | Used to create the vehicle intended path on video display. |
Accessory Protocol Interface Module (APIM) Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Backup camera status | BCM | Used to display the video status for static and active guidelines and zoom level. |