Brake Booster: Installation
WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
-
NOTE:
Make sure the brake booster rod is positioned correctly into the clevis block.
NOTE:
Apply the brake pedal several times to verify correct operation.
 Courtesy of FORD MOTOR COMPANY
|
- Using the diagnostic scan tool, carry out the Regenerative Brake System Calibration routine.