LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Hydraulic Brake Actuation (Hybrid/ENERGI)) >> Removal And Installation >> Brake Master Cylinder >> Removal

Brake Master Cylinder: Removal

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure in this information, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

  2. GFD435373Courtesy of FORD MOTOR COMPANY
  3. Torque: 18 lb.ft (25 Nm)
    GFD435374Courtesy of FORD MOTOR COMPANY
  4. Torque: 18 lb.ft (25 Nm)
GFD435375Courtesy of FORD MOTOR COMPANY