LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Information Center - Instrumentation, Message Center And Warning Chimes (2 Of 2) (Hybrid/ENERGI)) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes - 2.0L Duratec - Hybrid (103kW/140PS) (UA) >> Pinpoint Tests >> Pinpoint Test BG : The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative >> Pinpoint Test BG : The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative

Pinpoint Test BG : The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

  1. BG1 CHECK THE SAFETY BELT WARNING CHIME OPERATION

    • Ignition OFF.

    • Ignition ON.

    • Unbuckle the driver safety belt.

    • Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    Yes  GO to  BG2
    No  Refer to IPC Guided Routine .

  2. BG2 CHECK THE TURN SIGNAL INDICATOR OPERATION

    • Verify the RH and LH turn signal indicators operate correctly.

    Do the turn signal indicators operate correctly? 

    Yes  GO to  BG3
    No  GO to Pinpoint Test L 

  3. BG3 PERFORM THE BCM (BODY CONTROL MODULE) SELF-TEST

    • Using a diagnostic scan tool, perform the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Body Control Module (BCM) .
    No  Refer to IPC Guided Routine .
scientia non olet · About LEMON Manuals