LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Wheels And Tires (Except Hybrid)) >> Diagnosis And Testing >> Wheels And Tires >> Pinpoint Tests >> Pinpoint Test B : Outer Edge, Shoulder Wear

Pinpoint Test B : Outer Edge, Shoulder Wear

WARNING: This page is about a different variant/trim than selected.

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

  1. Possible Sources 

    • Excessive toe in and/or positive camber
    • Incorrect wheel and tire assembly rotation intervals
    • High-speed cornering

  2. B1 MEASURE THE TREAD DEPTH

    • Using a tread depth gauge or similar tool, measure the outside edge/shoulder tread depth.

    Is the tread depth greater than 1.588 mm (0.0625 in) ' 

    Yes  ROTATE the wheel and tire assemblies. CHECK and ADJUST the toe to nominal -0.15 degrees (toe out). CHECK and ADJUST caster and camber to nominal. REFER to: Front Camber Adjustment .
    No  INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to: Front Camber Adjustment .
scientia non olet · About LEMON Manuals