DTC P032C - Knock/Combustion Vibration Sensor C Circuit Low

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P032C - KNOCK/COMBUSTION VIBRATION SENSOR C CIRCUIT LOW

Description:	This DTC sets when the voltage goes outside a calibrated level. The knock sensor 12 (KS12) detects vibrations upon increase and decrease in engine RPM. The KS12 sensor generates a voltage based on this vibration.
Possible Causes:	KS12 circuit open KS12RTN circuit open KS12 circuit short to ground KS12RTN circuit short to ground Damaged KS12
Diagnostic Aids:	The vehicle may need to be driven for several minutes to set this DTC.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DG .