DTC P032A - Knock/Combustion Vibration Sensor C Circuit

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P032A - KNOCK/COMBUSTION VIBRATION SENSOR C CIRCUIT

Description:	This DTC sets when the voltage goes outside a calibrated level. The knock sensor 12 (KS12) detects vibrations upon increase and decrease in engine RPM. The KS12 sensor generates a voltage based on this vibration.
Possible Causes:	KS12 circuit open KS12RTN circuit open KS12 circuit short to voltage KS12RTN circuit short to voltage KS12 circuit short to ground KS12RTN circuit short to ground Damaged KS12
Diagnostic Aids:	A KS12 sensor voltage greater than 0.5 volt with the ignition ON, engine OFF, indicates a concern is present. The vehicle may need to be driven for several minutes to set this DTC.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DG .