DTC P0327 - Knock/Combustion Vibration Sensor A Circuit Low

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P0327 - KNOCK/COMBUSTION VIBRATION SENSOR A CIRCUIT LOW

Description:	This DTC sets when the voltage goes outside a calibrated level. The knock sensor 11 (KS11) detects vibrations upon increase and decrease in engine RPM. The KS11 sensor generates a voltage based on this vibration.
Possible Causes:	KS11 circuit open KS11RTN circuit open KS11 circuit short to ground KS11 RTN circuit short to ground Damaged KS11
Diagnostic Aids:	The vehicle may need to be driven for several minutes to set this DTC.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DG .