DTC P0325 - Knock/Combustion Vibration Sensor A Circuit

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P0325 - KNOCK/COMBUSTION VIBRATION SENSOR A CIRCUIT

Description:	This DTC sets when the voltage goes outside a calibrated level. The knock sensor 11 (KS11) detects vibrations upon increase and decrease in engine RPM. The KS11 sensor generates a voltage based on this vibration.
Possible Causes:	KS11 circuit open KS11RTN circuit open KS11 circuit short to voltage KS11RTN circuit short to voltage KS11 circuit short to ground KS11RTN circuit short to ground Damaged KS11
Diagnostic Aids:	A KS11 sensor voltage greater than 0.5 volt with the ignition ON, engine OFF, indicates a concern is present. The vehicle may need to be driven for several minutes to set this DTC.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DG .