LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (Engine Controls - Powertrain DTC Descriptions (Except Diesel & Hybrid) - DTC P023A - P060D) >> DTC P0297 - Vehicle Overspeed Condition

DTC P0297 - Vehicle Overspeed Condition

WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P0297 - VEHICLE OVERSPEED CONDITION

Description:  This DTC sets when the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. The vehicle speed is continuously monitored and evaluated by the PCM. For additional information on the vehicle speed limiter, refer to POWERTRAIN CONTROL SOFTWARE .
Possible Causes: 
  • Vehicle driven at a high rate of speed
Diagnostic Aids:  If there are no other symptoms, return the vehicle to the customer with information about the DTC.
If a symptom is present, refer to NO DIAGNOSTIC TROUBLE CODES (DTCS) PRESENT SYMPTOM CHART INDEX .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.