DTC P0223 - Throttle/Pedal Position Sensor/Switch B Circuit High

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P0223 - THROTTLE/PEDAL POSITION SENSOR/SWITCH B CIRCUIT HIGH

Description:	This DTC sets when the electronic throttle control (ETC) throttle position (TP) sensor signal is too high.
Possible Causes:	TP2 circuit short to voltage TP2 circuit short to VREF TP2 circuit open ETCRTN circuit open Damaged TP2 sensor
Diagnostic Aids:	This concern exhibits a symptom of limited power. A TP2 PID reading greater than 4.75 volts in ignition ON, engine OFF or ignition ON, engine running indicates a concern is present.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DV .