DTC P0192 - Fuel Rail Pressure Sensor Circuit Low (Bank 1)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P0192 - FUEL RAIL PRESSURE SENSOR CIRCUIT LOW (BANK 1)
| Description: | This DTC sets when the PCM detects the FRP circuit is shorted to SIGRTN or ground. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A FRP PID value during ignition ON, engine OFF or ignition ON, engine running less than 0.3 volt indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DD . | ||