DTC P013B - O2 Sensor Slow Response - Lean To Rich (Bank 1 Sensor 2)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P013B - O2 SENSOR SLOW RESPONSE AND LEAN TO RICH (BANK 1 SENSOR 2)
| Description: | During a deceleration fuel shut-off (DFSO) event, the PCM monitors how quickly the heated oxygen sensor bank 1, sensor 2 (HO2S12) switches from lean to rich. The measured rate of the lean to rich switch is compared to a calibrated fault threshold value. The measured rate of the lean to rich switch is compared to a calibrated fault threshold value. This DTC sets when the measured value is slower than the threshold value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check for leaks in the exhaust system. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DW . | ||