DTC P0113 - Intake Air Temperature Sensor 1 Circuit High (Bank 1)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P0113 - INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT HIGH (BANK 1)
| Description: | This DTC sets when the intake air temperature (IAT) sensor signal is greater than the self-test maximum. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT sensor PID reading greater than self-test maximum with the ignition ON engine OFF or during any engine operating mode indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DA . | ||