DTC P0108 - Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P0108 - MANIFOLD ABSOLUTE PRESSURE/BAROMETRIC PRESSURE SENSOR CIRCUIT HIGH
| Description: | This DTC sets when the manifold absolute pressure (MAP) sensor operating voltage is greater than the maximum allowable calibrated parameter of 4.96 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DM . | ||