DTC P0106 - Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P0106 - MANIFOLD ABSOLUTE PRESSURE/BAROMETRIC PRESSURE SENSOR CIRCUIT RANGE/PERFORMANCE

For Vehicles With 2.7L, 3.0L, And 3.5L GTDI Engines
Description:	This DTC sets when the MAP PID does not correlate with the BARO or the TCBP PID.
Possible Causes:	Slow responding manifold absolute pressure (MAP) sensor Damaged MAP sensor
Diagnostic Aids:	This DTC may be accompanied by other DTCs. Check for other DTCs and diagnose those first.
For All Others
Description:	This DTC sets when the manifold absolute pressure (MAP) sensor input does not correlate with an inferred MAP value. The inferred value is based on the mass airflow (MAF) sensor (if equipped).
Possible Causes:	Slow responding MAP sensor Damaged MAP sensor Damaged MAF sensor (if equipped)
Diagnostic Aids:	This DTC may be accompanied by other DTCs. Check for other DTCs and diagnose those first.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DM .