DTC P0103 - Mass Or Volume Air Flow Sensor A Circuit High
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P0103 - MASS OR VOLUME AIR FLOW SENSOR CIRCUIT HIGH
| Description: | This DTC sets when the mass airflow (MAF) sensor output changes above a maximum calibrated limit while the engine is running. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Make sure the MAF sensor connector is locked and seated correctly. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DC . | ||