DTC P00D2 - HO2S Heater Control Circuit Range/Performance (Bank 1 Sensor 2)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P00D2 - HO2S HEATER CONTROL CIRCUIT RANGE/PERFORMANCE (BANK 1 SENSOR 2)
| Description: | This DTC sets when the internal impedance of the heated oxygen sensor bank 1, sensor 2 (HO2S12) exceeds the calibrated threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Inspect the connectors for signs of damage, water intrusion or corrosion. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DW . | ||