DTC P0096 - Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P0096 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | This DTC sets when the intake air temperature 2 (IAT2) sensor value does not correlate with the charge air cooler temperature (CACT) sensor value or the intake air temperature (IAT) sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT2 sensor value exceeds the maximum calibrated temperature threshold while driving. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Aftermarket heaters that are attached to the engine, transmission or battery may cause DTC P0096 to set in cold weather climates after a 6 hour soak period. This DTC may be accompanied by other DTCs. Check for other DTCs and diagnose those first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DN . | ||