DTC P0020 - A Camshaft Position Actuator A Control Circuit/Open Bank 2

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P0020 - A CAMSHAFT POSITION ACTUATOR CONTROL CIRCUIT/OPEN BANK 2

Description:	This DTC sets when a low or high voltage on the VCT21 circuit is detected. This DTC sets if the voltage exceeds a calibrated limit for a calibrated amount of time.
Possible Causes:	VCT21 circuit open VCT21 circuit short to voltage VCT21 circuit short to ground VPWR circuit open Damaged variable camshaft timing bank 2 solenoid 1 (VCT21)
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HK .