LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Powertrain Control Software >> Multiplexing Implementation

Multiplexing Implementation

WARNING: This page is about a different variant/trim than selected.

Currently Ford Motor Company uses CAN communication language protocol to communicate with the PCM.

For additional information about the module communications network, refer to the Module Communications Network article for Description and Operation.

scientia non olet · About LEMON Manuals