Typical EVAP Dual Check Valve Assembly
WARNING: This page is about a different variant/trim than selected.
 Courtesy of FORD MOTOR CO.
|
| Item |
Number |
Description |
| 1 |
- |
Purge Flow To The Intake Air Inlet System To The Turbocharger From The Check Valve And EVAP Ejector |
| 2 |
- |
Purge Flow To The Intake Manifold |
| 3 |
- |
Turbocharger Boost Pressure From The Charge Air Cooler (CAC) |
| 4 |
- |
Purge Flow From The Fuel Tank |