Air Measurement System
WARNING: This page is about a different variant/trim than selected.
With this condition, the engine runs rich or lean of stoichiometry 14.7 to 1 (9 to 1 E100) air to fuel ratio, if the PCM is not able to compensate enough to correct for the condition.
For example, the MAF sensor measurement is inaccurate due to a corroded connector, contaminated or dirty connector. A contaminated MAF sensor typically results in a rich system at low airflows (PCM reduces fuel) and a lean system at high airflows (PCM increases fuel).
With this condition, the engine runs rich or lean of stoichiometry 14.7 to 1 (9 to 1 E100) air to fuel ratio, if the PCM is not able to compensate enough to correct for the condition.