LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (SEATBELT Systems (Except Hybrid)) >> Removal And Installation >> Seatbelt Retractor and Pretensioner >> Installation

Seatbelt Retractor and Pretensioner: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: During installation, make sure the seatbelt webbing is not twisted and the seatbelts and buckles are accessible to the occupants.

    To install, reverse the removal procedure.

  2. If the SRS was depowered, repower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering .
  3. Check the seatbelt system for correct operation. Refer to: Seatbelt Systems .
scientia non olet · About LEMON Manuals