LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (SEATBELT Systems (Except Hybrid)) >> Removal And Installation >> Front Seatbelt Buckle >> Removal

Front Seatbelt Buckle: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the front seat. Refer to: Front Seat .
  2. Remove the seatbelt buckle.

    1. Disconnect the electrical connector.
    2. Detach the wire harness retainer.
    3. Remove the bolt.

      Torque: 26 lb.ft (35 Nm)

GFD485384Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals