LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 55 (Starting System - 2.5L DURATEC (125KW/170PS)) >> Diagnosis And Testing >> Starting System >> Symptom Chart(s) >> Symptom Chart: Auto-Start-Stop System

Symptom Chart: Auto-Start-Stop System

WARNING: This page is about a different variant/trim than selected.

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Symptom Chart 

Condition Possible Sources Actions
Auto-Start-Stop System is inoperative or does not operate correctly One or more required criteria required for Auto-start-stop operation has not been met. REFER to owners manual Refer to Engine Controls - Description & Operation (Except Diesel & Hybrid) for proper system operation.
Electronic Control Modules RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs).
For PCM Diagnostic Trouble Codes (DTCs), REFER to PCM DTC Chart  .
For BCM Diagnostic Trouble Codes (DTCs), REFER to BCM DTC Chart  .
For all other Diagnostic Trouble Codes (DTCs), REFER to: Diagnostic Trouble Code Charts / .
Vehicle Battery Refer to Engine Controls - Symptom Charts (Except Diesel & Hybrid) .
Auto-Start-Stop System cannot be disabled by driver Wiring, terminals or connectors
Auto-start-stop disable switch
FCIM
Refer to the appropriate service information in the Information & Entertainment Systems  articles for the procedure.