LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 52 (Electronic Engine Controls - 1.5L ECOBOOST (118KW/160PS) - I4) >> Removal And Installation >> Boost Pressure Sensor >> Removal

Boost Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the electrical connector, remove the retainer and the turbocharger boost pressure sensor.

    Torque: 89 lb.in (10 Nm)

GFD482356Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals