LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Climate Control System - General Information (2 Of 2) (Except Hybrid)) >> Removal And Installation >> Cabin Heater Coolant Pump - 1.5L EcoBoost (118kW/160PS) - I4 >> Installation

Cabin Heater Coolant Pump - 1.5L EcoBoost (118kW/160PS) - I4: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals