Pinpoint Test A : Engine Does Not Crank: Notes
WARNING: This page is about a different variant/trim than selected.
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Starting System - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P06E9 | Engine Starter Performance | No engine rotation detected during crank event |
Possible Sources
- Battery
- Battery cables
- IPC
- Starter motor
- BJB starter relay
Visual Inspection and Diagnostic Pre-checks
- Inspect the Run/start relay.
- Inspect the high current BJB connections.
- Verify the BJB fuse 84 (10A).
- Verify the BCM fuse 12 (7.5A).
- Inspect the Integrated Keyhead Transmitter (IKT).