Cylinder Block
WARNING: This page is about a different variant/trim than selected.
| Item |
Specification |
| Cylinder Bore Diameter |
3.110 -3.111 In (79.005 -79.025 Mm) |
| Cylinder Bore Maximum Out-Of-Round |
0.0003 In (.008 Mm) |
| Main Bearing Bore Diameter |
2.126 -2.127 In (54 -54.018 Mm) |
| Head Gasket Surface Flatness |
0.05 Mm (0.002 In) Over A 200 Mm (7.874 In) X 200 Mm (7.874 In) Area |